Table 15
Preconversion steps (Part 2 of 2)
LD 22 - Print AHST - Capture Systems Events to compare will new software if required
LD 117 - PRT SEL 500 - Same as above
Postconversion checks
Table 16
Postconversion checks
Post Conversion Checks
Perform these checks after a successful INI.
Test for dial tone
Stat D Channels for proper operation
Ensure that all XPEC's are in service via visual inspection
Ensure that all AUX applications are working
LD 30 LDIS (Verify that output is the same prior to upgrade)
Appendix A: Upgrade checklists
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
Page 154 of 159