Avaya Meridian 1 Series Upgrade Manual page 45

Page 45 of 159 Performing the upgrade
NN43021-466 Standard 06.02
Procedure 8
Cable the Clock Controller 1 to FIJI hardware
Both NTRC46 cables must be the same length.
Connect the cables to the Clock Controller 1 as shown in
1 Connect P2 of the NTRC49 cable to port J3 of Clock Controller 1.
2 Connect P2 of the NTRC46 cable from Clock 1 to J3 of the FIJI card in
group 0, shelf 1.
December 2013
IMPORTANT!
End of Procedure
Figure 8 on page 46
.