Page 121 of 159
Figure 21
ELAN connection on Ethernet port coupler
NN43021-466
Standard 06.02
lnstalling a Signaling Server
9
Connect the server to the TLAN subnet.
a.
Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the Server
faceplate.
b.
Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c.
Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d.
Label the Ethernet port coupler as TLAN.
See Figure 22 and Figure 23.
December 2013