Table of Contents
Advertisement
8
Check the status of the FIJI alarms:
STAT ALRM
****
9
Check applications.
10 Check dial tone.
Switching call processing
Procedure 26
Switching call processing
1
Enter LD 135 on Core/Net 1 and issue the SCPU command. Call
processing switches to Core/Net 0.
LD 135
SCPU
****
2
Log in to Core/Net 0 and verify that the switchover was successful and
that all hardware is operational. Perform acceptance testing as required.
Performing the upgrade
Query the alarm condition for all FIJI cards in
all Network Groups
Exit program
End of Procedure
Transfer call processing from active Core/Net to
standby Core/Net
Exit program
Core/Net 0 is now the active call processor.
End of Procedure
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
Page 102 of 159
Advertisement
Table of Contents
