Table of Contents
Advertisement
Page 135 of 159
NN43021-466
Standard 06.02
lnstalling a Signaling Server
CS 1000 Linux Base on your CP PM, CP DC or COTS server before you can
install any Signaling Server applications.
CS 1000 Release 7.5 supports the following Signaling Server hardware:
•
CP PM server
•
CP DC server
•
IBM X306m server
•
IBM x3350 server
•
HP DL320-G4 server
•
Dell R300 server
Avaya CS 1000 Release 7.5 does not support the
ISP1100 Signaling Server. You must replace the ISP1100
with a CP PM, CP DC, or COTS Signaling Server.
If you are upgrading from a Vxworks Signaling Server, Avaya recommends
that you backup your IP Phone database and Network Routing Service (NRS)
database on your current software release before upgrading to CS 1000 Linux
Base and installing applications. You can restore your IP Phone database and
NRS backups after you complete the Signaling Server upgrade.
CS 1000 Release 7.5 requires a Signaling Server to have at least 2 GB of
RAM memory, and at least 40 GB of hard drive capacity. You must upgrade
Signaling Servers with less than 2GB of RAM before installing CS 1000
Release 7.5 Linux Base and Signaling Server software. For detailed
instructions on performing this memory upgrade, see Circuit Card:
Description and Installation (NN43001-311).
You can upgrade a CP PM Signaling Server to support the CS 1000 Linux
Base and applications for Communication Server 1000 with a CP PM
Signaling Server Linux upgrade kit. The upgrade kit includes the following
components.
•
Linux OS preloaded hard drive kit (optional, provided if required)
December 2013
IMPORTANT!
Advertisement
Table of Contents
