Page 39 of 159
Performing the upgrade
Adding Side 1 FIJI Hardware
NN43021-466
Standard 06.02
Procedure 6
Splitting the Cores
1
In Core/Net 0,enter the SPLIT command from LD 135.
LD 135
SPLIT
****
2
Hardware disable all CNI cards in Core 1.
The system is now in split mode, with call processing on
Core 0.
Procedure 7
Add Side 1 FIJI hardware
1
Faceplate-disable the FIJI cards.
2
Insert the FIJI cards in Side 1. DO NOT seat the FIJI cards.
Note: Double slot FIJI cards install in slots 2 and 3 of the Network
modules, and slots 8 and 9 of the Core/Net modules. Single slot FIJI cards
(with vintages equal to or later than NTRB33BBE5) install in slot 2 of the
Network modules, and slot 9 of the Core/Net modules.
December 2013
Load program
Split the Cores
Exit program
End of Procedure
End of Procedure