Avaya Meridian 1 Series Upgrade Manual page 119

Page 119 of 159
NN43021-466 Standard 06.02
lnstalling a Signaling Server
Figure 19
Selected J2-J5 plate on back panel of UEM
8 Establish an ELAN port on the back panel of the UEM.
a. Insert the end of one of the RJ-45 CAT5 Ethernet patch cables
(supplied) into the ELAN network interface (ELAN port) on the Server
faceplate.
b. Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c. Plug the other end of the Ethernet patch cable into one of the
Ethernet port couplers mounted in the Ethernet port adapter plate.
d. Label the Ethernet port coupler as ELAN.
See Figure 20 and Figure 21.
December 2013