Power Inline Legacy - Planet SGS-6341 Series Command Manual

Enable the allowed high-inrush current when nonstandard PD is powered instantaneously.
Switch(config)#power inline high-inrush enable

78.1.4 power inline legacy

Command:
power inline legacy enable
no power inline legacy enable
Function:
Set whether or not to provide power supply for non-standard IEEE PD.
Parameters:
None.
Command Mode:
Global Mode.
Default:
Do not provide power supply for non-standard IEEE PD.
Usage Guide:
With this function enabled, the switch will be compatible with and provide power supply for
non-standard IEEE PD.
Examples:
Set the switch to provide power supply for non-standard IEEE PD.
Switch(Config)#power inline legacy enable
78.1.5 power inline max (Global)
Command:
power inline max <max-wattage>
no power inline max
Function:
Set the global max output power of PoE.
Parameters:
max-wattage: value of the max output power, in W.
Command:
Global Mode.
Default:
The global max output power of SGS-6341-24P4X is 370W. The no power inline max will resume
the default configuration.
Usage Guide:
78-15