Show Power Inline - Planet SGS-6341 Series Command Manual

Switch(Config-Ethernet1/0/2)#power inline priority critical
78.2 Commands for PoE Monitoring and Debugging
78.2.1 Monitoring and Debugging Information

78.2.1.1 show power inline

Command:
show power inline
Function:
Display global PoE configurations and status.
Parameters:
None.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
The meanings of each field are listed in the following table:
Field
Power Inline Status
Power Available
Power Used
Power Remaining
Min Voltage
Max Voltage
Police
Legacy
Disconnect
HW Version
SW Version
Mode
Description
The global PoE status: enabled or disabled
The global max value of available power
The global value of used power
The global value of remaining power
The global threshold of under-voltage
The global threshold of over-voltage
The power priority policy status: enabled or disabled
The non-standard PD detection status: enabled or disabled
The PD disconnection mode
The hardware version of the PoE module
The software version of the PoE module
Power supply mode
Signal: power supply over signal cables (Alternative A)
spare: power supply over spare cables (sAlternative B)
78-18