Cutting Tools; Cutting Tool Types - Roland monoFab SRM-20 User Manual

Cutting Tools

Cutting Tool Types

The SRM-20 supports the use of cutting tools with a shank diameter of up to 6 mm.
* An optional collet is required when the shank diameter is 3 mm or 4 mm.
①
No. Name
Straight (square)
Ball
Radius
Conical
Drill
②
Shape Appropriate cutting method
Surface leveling
Flat tip
Roughing
Round tip Finishing
Flat tip with round corners Roughing
Pointed tip Engraving
Tip with blades Drilling
③ ④
Remarks
Suited to cutting flat surfaces
To cleanly finish the cut surface
Lines do not easily occur after the cutting tool has passed by
Less remaining cutting waste when compared to the ball
The groove width (character thickness) changes according to the
cutting depth
Drill diameter = hole diameter
19
⑤