Roland monoFab SRM-20 User Manual page 132

8.
In the "Confirm Device Uninstall"
the driver software for this
to close the "Device Manager."
9.
Disconnect the USB cable that is connected to the printer, and then
restart Windows.
10.
Uninstalling the driver for the relevant device.
11.
Follow the procedure "Uninstalling the Driver"
the driver.
12.
Follow the procedure "Installing the Driver"
"http://startup.rolanddg.com"
"
Windows 7
1.
Use a USB cable to connect the machine and the computer, and
then turn the machine on.
2.
If the "Found New Hardware"
close it. Disconnect any USB cables for printers other than this
machine.
3.
On the taskbar, click [Start], and then right-click [Computer]. Click
[Properties].
4.
Click [Device Manager]. When the
box appears, click [Continue].
"Device Manager"
The window appears .
dialog box, select the [Delete
device]. check box, and then click
(p. 133) to uninstall
to install the driver again.
wizard appears, click [Cancel]
"User Account Control"
5.
Click [Show hidden devices]
[OK]
6.
Double-click
model name or
item you selected.
7.
Click [Delete]
8.
"Confirm Device Uninstall"
In the
driver software for this device.]
close the "Device Manager."
9.
Disconnect the USB cable that is connected to the printer, and then
restart Windows.
10.
Uninstalling the driver for the relevant device.
Follow the procedure
driver .
11.
Follow the procedure
"http://startup.rolanddg.com"
"
to
dialog
132
on the [View]
[Printers] or [Other devices] in the list. Click the
[Unknown device], whichever appears below the
on the [Action] menu.
dialog box, select
check box, and then click
"Uninstalling the Driver"
"Installing the Driver"
to install the driver again.
What to Do If . . .
menu.
the[Delete the
[OK] to
(p . 133) to uninstall the