Roland monoFab SRM-20 User Manual page 41

3.
Configure the size settings in the cutting data.
The dialog displays the X, Y, and Z size settings for the currently open model .
You can change the size settings by entering new values into the X, Y, and Z
boxes .
MEMO
Clicking restores the original size .
MEMO
[Scale]
When the check box is selected, you can enter the model size
settings as a percentage .
4.
Select the top surface of the cutting data model.
Turn up the face that will be ground first .
Changing the top surface changes the X, Y, and Z dimension values as well .
A message appears if the size exceeds the movable range of the machine .
Follow the prompts and take action accordingly .
41
Creating an SRP Player File