2.
On the dialog that appears, configure leveling cutting range,
depth, and other settings.
This example assumes that the following options are configured:
•
Material : Chemical Wood (Soft)
•
Tool : 3 mm Square
•
Orbit Direction : Up Cut
•
Depth : 1.00 mm
•
X : 100.00 mm
•
Y : 100.00 mm
When you are done, click
.
3.
Make sure that the desired tool and origin position are correctly set
up and then click
IMPORTANT
Before starting the cutting processes, double-check that the origin point
exists on the top surface of the material.
If the origin point is incorrectly positioned, the machine may fail to cut the
workpiece as expected or break down.
94
Cutting (One Side Cutting)
.