Operations Available During Cutting - Roland monoFab SRM-20 User Manual

Operations Available during Cutting

Pausing / Resuming
Click [Pause] of VPanel. The display of a button changes to [RESUME]. Click
[RESUME]
to resume.
Cleaning during an extensive cutting operation (X,Z-axis)
If cutting waste accumulates during an extensive cutting
operation, the machine's operation may be hindered,
resulting in a product that does not meet expectations.
Keep an eye on how much cutting waste builds up and
pause the machine to remove the cutting waste that has
built up around the X- and Z-axes before the movement
worsens. Also remove the cutting waste of a dust tray.
If you [Pause]
material, traces of cutting will be less likely to remain on
the material.
104
Cutting (One Side Cutting)
when the cutting tool is not touching the