What To Do If; Initialization Is Not Performed / Initialization Fails; Vpanel Does Not Recognize The Machine - Roland monoFab SRM-20 User Manual

What to Do If . . .

Initialization Is Not Performed / Initialization Fails

Is a Front Cover Open?
When starting the machine, make sure that the front cover is closed . For
safety, initialization is not performed when a cover remains open at startup .
Is a Front Guard Pull Down ?
When the front guard falls down, the front cover can not be closed firmly .
Therefore the machine is not performed .
""Part Names and Functions"
Is a Large Amount of Cutting Waste Present?
Clean away any cutting waste . Clean the area around the spindle head
especially carefully .
""Cleaning the X-/Z-Shafts"
Is a Large Amount of Cutting Waste Present in the Dust Tray?
Clean away any cutting waste in the dust tray .
""Cleaning the X-/Z-Shafts"
Is Anything Caught on the Spindle Head or Rotary Axis Unit?
Check whether something has become caught and is impeding initialization .
(p . 9)
(p . 119)
(p . 119)

VPanel Does Not Recognize the Machine

Has Initialization Been Completed?
Has initialization been completed? Before you start VPanel, first switch on the
power to the machine .
""Start VPanel" (p . 11)
Is the Computer Connected?
Check whether the connector cable has come loose . Please use the included
cable .
Is the Driver Installed Correctly?
If the connection to the computer is not made in the sequence described, the
driver may fail to be installed correctly . VPanel does not function normally
when driver is misconfigured . Check again to ensure that the connection was
made using the correct procedure .
" Download "http://startup.rolanddg.com"
""The Driver Cannot Be Installed"
126
(p . 131)