Setting Up the Output Device
Configure SRP Player so that it can output data to the cutting machine .
IMPORTANT
Unless a machine setup is performed, a right setup or output cannot be
performed .
When Starting SRP Player for the First Time
Following the instructions displayed in the dialog, specify the
machine to connect,"
the
"unit of length,"
"cutting
and the
"cutting tool to use."
31
Procedure
1.
Connect the cutting machine to the computer with the USB cable
and turn on the machine.
""STEP 1 : Turning the Power On"
2.
Start SRP Player.
This displays a dialog box for configuring the settings .
""Starting SRP Player"
(p . 30)
SRP Player
(p . 80)