Cutting Area; Maximum Cutting Area Of Srm-20 - Roland monoFab SRM-20 User Manual

Cutting Area

Maximum Cutting Area of SRM-20

CAUTION
Arrange the material, Jig, and the like so that they fit within the determined range. Anything extending beyond may strike moving parts. Be sure to observe this
requirement, as failure to do so may result in damage to the workpiece or frame or malfunction of the machine.
XY Direction
. . . Maximum Cutting Area
152.4 mm
(Working range
of Y axis)
203.2 mm (Working range of X axis)
21
Table