Nc Code Setting; Nc Code Setting Dialog - Roland monoFab SRM-20 User Manual

NC Code Setting

NC Code Setting Dialog

This dialog is displayed when
NC Code Tab
Display
Tool-diameter Offset Type
Values with Decimal Point
Optional Block Skip
in Settings is clicked on the VPanel .
Function
This selects the type of correction (offset) for the tool diameter . The locus through which the tool passes differs according to the offset type .
For more information, refer to the "NC Code Reference Manual."
" Separate volume "NC Code Reference Manual"
This selects the method of interpretation for the numerical values in NC codes .
Conventional Method : Values are interpreted as millimeters (or inches) when they contain a decimal point, or as thousandths of a millimeter
(or ten-thousandths of an inch) when no decimal point is present .
Calculator Method : Values are always interpreted as millimeters (or inches) regardless of whether a decimal point is present .
When calculator-method interpretation is used, you choose the range of application for the method .
This setting determines whether optional blocks are skipped .
108