Step 3: Performing Cutting - Roland monoFab SRM-20 User Manual

Cutting Only the Selected Process
Procedure
1.
Open pallet.
2.
Click .
3.
Click the process you do not need.
4.
Click [Enable/Disable
5.
Repeat steps 3 and 4 to disable all the unnecessary processes.
Only the colored processes
6.
Click .
7.
Start the cutting process using the same procedure as for the
normal cutting process.
""Performing Cutting" (p. 95)
Cutting].
will be output.
98
Cutting (One Side Cutting)