Preparing The Machine; Flow Diagram - Roland monoFab SRM-20 User Manual

Preparing the Machine

Flow Diagram

"STEP 1 : Turning the Power On"
(p. 80)
※
"STEP 2 : The Machine Run-in"
(p. 81)
※
"STEP 3 : Confirm the Command Set"
(p. 83)
"STEP 4 : Attach the Cutting Tool"
(p. 84)
*Work is unnecessary in some cases.
For detail, please confirm procedure contents.
※不要な場合があります。詳しくは手順内容をご確認ください。
79