Trane TR200 Programming Manual page 86

4-51 Warning Current High
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
4-53 Warning Speed High
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
NOTE: Any changes in par.4-13
High to the same value as set in par.4-13
If a different value is needed in par.4-53
4-13 Motor Speed High Limit
4-54 Warning Reference Low
Range:
-999999. [Application dependant]
999 N/
A*
4-55 Warning Reference High
Range:
999999. [Application dependant]
999 N/
A*
4-56 Warning Feedback Low
Range:
-999999. [Application dependant]
999
Proc-
essCtrlU-
nit*
4-57 Warning Feedback High
Range:
999999. [Application dependant]
999
Proc-
essCtrlU-
nit*
TR200 Programming Guide
Function:
Function:
Motor Speed High Limit [RPM]
Motor Speed High Limit
Warning Speed
[RPM]!
Function:
Enter the lower reference limit. When the actual reference falls below this
limit, the display indicates Ref Low. The signal outputs can be program-
med to produce a status signal on terminal 27 or 29 and on relay output
01 or 02.
Function:
Enter the upper reference limit. When the actual reference exceeds this
limit, the display reads Ref High. The signal outputs can be programmed
to produce a status signal on terminal 27 or 29 and on relay output 01 or
02.
Function:
Enter the lower feedback limit. When the feedback falls below this limit,
the display reads Feedb Low. The signal outputs can be programmed to
produce a status signal on terminal 27 or 29 and on relay output 01 or
02.
Function:
Enter the upper feedback limit. When the feedback exceeds this limit, the
display reads Feedb High. The signal outputs can be programmed to
produce a status signal on terminal 27 or 29 and on relay output 01 or
02.
Parameter Description
will reset the value in par.4-53
[RPM].
High, it must be set after programming of par.
Warning Speed
4-49