Trane TR200 Programming Manual page 236

23-13 Maintenance Time Interval
Range:
1 h* [1 - 2147483647 h]
23-14 Maintenance Date and Time
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
23-15 Reset Maintenance Word
Option:
[0] * Do not reset
[1] Do reset
NOTE
When messages are reset - Maintenance Item, Action and Maintenance Date/Time are not cancelled. par.23-12
tenance Time Base is set to Disabled [0].
23-16 Maintenance Text
Range:
0 N/A* [0 - 0 N/A]
23-5* Energy Log
The adjustable frequency drive is continuously accumulating the consumption of the motor controlled, based
on the actual power yielded by the adjustable frequency drive.
These data can be used for an Energy Log function allowing the user to compare and structure the information
about the energy consumption related to time.
There are basically two functions:
TR200 Programming Guide
Function:
Set the interval associated with the current preventive maintenance
event. This parameter is only used if
Hours
[2] is selected in par.23-12
reset from par.23-15 Reset Maintenance
Example:
A preventive maintenance event is set up for Monday at 8:00. par.
23-12 Maintenance Time Base
tenance Time Interval is 7 x 24 hours=168 hours. The next maintenance
event will be indicated the following Monday at 8:00. If this maintenance
event is not reset until Tuesday at 9:00, the next occurrence will be the
following Tuesday at 9:00.
Function:
Function:
Do reset
Set this parameter to
16-96 Maintenance Word and reset the message displayed in the
keypad. This parameter will change back to
ing OK.
Function:
Parameter Description
Running Hours
[1] or
Maintenance Time Base. The timer is
Word.
Operating hours
is [2] and par.23-13
[1] to reset the Maintenance Word in par.
Do not reset
[0] when press-
Operating
Main-
Main-
4-199