Trane TR200 Programming Manual page 181

Parameter Description
16-52 Feedback [Unit]
Range:
0.000 [-999999.999 - 999999.999
Proc- ProcessCtrlUnit]
essCtrlU-
nit*
16-53 Digi Pot Reference
Range:
0.00 N/ [-200.00 - 200.00 N/A]
A*
16-54 Feedback 1 [Unit]
Range:
0.000 [-999999.999 - 999999.999
Proc- ProcessCtrlUnit]
essCtrlU-
nit*
16-55 Feedback 2 [Unit]
Range:
0.000 [-999999.999 - 999999.999
Proc- ProcessCtrlUnit]
essCtrlU-
nit*
16-56 Feedback 3 [Unit]
Range:
0.000 [-999999.999 - 999999.999
Proc- ProcessCtrlUnit]
essCtrlU-
nit*
16-58 PID Output [%]
Range:
0.0 %* [0.0 - 100.0 %]
16-6* Inputs and Outputs
Parameters for reporting the digital and analog IO ports.
16-60 Digital Input
Range:
0 N/A* [0 - 1023 N/A]
4-144
Function:
View value of resulting feedback value after processing of Feedback 1-3
(see par.16-54 Feedback 1 [Unit], par.16-55
16-56) in the feedback manager.
Feedback
See par. 20-0* .
The value is limited by settings in par. 20-13 and par. 20-14. Units as set
in par.20-12 Reference/Feedback
Function:
View the contribution of the digital potentiometer to the actual reference.
Function:
View value of Feedback 1, see par. 20-0*
The value is limited by settings in par.20-13
Feedb. and par.20-14 Maximum
20-12 Reference/Feedback Unit.
Function:
View value of Feedback 2, see par. 20-0*
The value is limited by settings in par. 20-13 and par. 20-14. Units as set
in par.20-12 Reference/Feedback
Function:
View value of Feedback 3, see parameter group 20-0*
The value is limited by settings in par.20-13
Feedb. and par.20-14 Maximum
20-12 Reference/Feedback Unit.
Function:
Function:
View the signal states from the active digital inputs. Example: Input 18
corresponds to bit no. 5, '0' = no signal, '1' = connected signal. Bit 6 works
in the opposite way, on = '0', off = '1' (safe stop input).
Feedback 2 [Unit]
Unit.
Feedback
.
Minimum Reference/
Reference/Feedb.. Units as set in par.
Feedback
.
Unit.
Feedback
Minimum Reference/
Reference/Feedb.. Units as set in par.
TR200 Programming Guide
and par.
.