Trane TR200 Programming Manual page 145

Parameter Description
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-03 Reset SLC
Option:
[0] * Do not reset SLC
[1] Reset SLC
13-1* Comparators
Comparators are used for comparing continuous variables (i.e., output frequency, output current, analog input,
etc.) to fixed preset values. In addition, there are digital values that will be compared to fixed time values. See
explanation in par.13-10 Comparator
result (TRUE or FALSE) directly. All parameters in this parameter group are array parameters with an index of
0 to 5. Select index 0 to program Comparator 0, select index 1 to program Comparator 1, etc.
4-108
This event is TRUE if the adjustable frequency drive is stopped or coasted
by any means (either via digital input, serial communication bus or oth-
er).
This event is TRUE if the adjustable frequency drive is tripped (but not
trip-locked) and the reset button is pressed.
This event is TRUE if the adjustable frequency drive is tripped (but not
trip-locked) and an automatic reset is issued.
This event is TRUE if the OK key on the keypad is pressed.
This event is TRUE if the Reset key on the keypad is pressed.
This event is TRUE if the Left key on the keypad is pressed.
This event is TRUE if the Right key on the keypad is pressed.
This event is TRUE if the Up key on the keypad is pressed.
This event is TRUE if the Down key on the keypad is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Use the result of timer 3 in the logic rule.
Use the result of timer 4 in the logic rule.
Use the result of timer 5 in the logic rule.
Use the result of timer 6 in the logic rule.
Use the result of timer 7 in the logic rule.
Function:
Retains programmed settings in all group 13 parameters (13-*).
Resets all group 13LC-## parameters (13-*) to default settings.
Operand. Comparators are evaluated once in each scan interval. Use the
TR200 Programming Guide