Trane TR200 Programming Manual page 131

Parameter Description
[1] Freeze output
[2] Stop
[3] Jogging
[4] Max. speed
[5] Stop and trip
[7] Select setup 1
[8] Select setup 2
[9] Select setup 3
[10] Select setup 4
[20] N2 Override Release
In LonWorks, the timeout function is also activated when the following SNVTs fail to be updated within the time
period specified in par.8-03
nviStartStop
nviReset Fault
nviControlWord
8-05 End-of-Timeout Function
Option:
[0] Hold set-up
[1] * Resume set-up
8-06 Reset Control Timeout
Option:
[0] * Do not reset
[1] Do reset
8-07 Diagnosis Trigger
Option:
[0] * Disable
[1] Trigger on alarms
[2] Trigger alarm/warn.
4-94
Control Timeout Time:
Function:
Select the action after receiving a valid control word following a timeout.
This parameter is active only when par.8-04
set to [Set-up 1-4].
Retains the set-up selected in par.8-04
displays a warning, until par.8-06
the adjustable frequency drive resumes its original set-up.
Resumes the set-up active prior to the timeout.
Function:
This parameter is active only when the choice
selected in par.8-05
Retains the set-up specified in par.8-04
set-up 1-4] following a control timeout.
Returns the adjustable frequency drive to the original set-up following a
control word timeout. When the value is set to
frequency drive performs the reset and then immediately reverts to the
Do not reset
[0] setting.
Function:
This parameter has no function for LonWorks.
nviDrvSpeedStpt
nviRefPcnt
nviRefHz
Control Timeout Function
Control Timeout Function
Reset Control Timeout
Hold set-up
End-of-Timeout Function.
Control Timeout
Do reset
TR200 Programming Guide
is
and
toggles. Then
[0] has been
Function, [Select
[1], the adjustable