Safety; High Voltage Warning - Trane TR200 Programming Manual

Safety

Warnings, cautions and notices
Note that warnings, cautions and notices appear at appropriate intervals throughout this manual. Warnings are
provide to alert installing contractors to potential hazards that could result in personal injury or death. Cautions
are designed to alert personnel to hazardous situations that could result in personal injury, while notices indicate
a situation that could result in equipment or property-damage-only accidents.
Your personal safety and the proper operation of this machine depend upon the strict observance of these
precautions.
Warnings, Cautions and Notices appear at appropriate sections throughout this literature. Read these carefully.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It could also
be used to alert against unsafe practices.
NOTE
Indicates a situation that could result in equipment or property-damage only accidents.
Indicates default setting

High Voltage Warning

WARNING
The voltage of the adjustable frequency drive and the MCO 101 option card is dangerous whenever it is connected to
line power. Incorrect installation of the motor or adjustable frequency drive may cause damage to the equipment,
serious injury or death. Consequently, it is essential to comply with the instructions in this manual as well as local and
national rules and safety regulations.
Safety Note
WARNING
The voltage of the adjustable frequency drive is dangerous whenever connected to line power. Incorrect installation of
the motor, adjustable frequency drive or serial communication bus could result in death, serious personal injury or
damage to the equipment. Consequently, the instructions in this manual, as well as national and local rules and safety
regulations, must be complied with.
WARNING
Failure to follow instructions below could result in death or serious injury.
TR200 Programming Guide 1-1