Trane TR200 Programming Manual page 241

Parameter Description
Once a second, the value of the operating variable selected is registered. If a value has been registered to equal
13%, the counter "10%–<20%" will be updated with the value "1". If the value stays at 13% for 10s, then "10"
will be added to the counter value.
The contents of counters can be displayed as bars on keypad. Select
Bin / Trending Timed Bin / Trending Comparison
NOTE
The counters starts counting whenever the adjustable frequency drive is powered up. The power cycle will shortly after
a reset zero the counters. EEProm data are updated once per hour.
23-60 Trend Variable
Option:
[0] * Power [kW]
[1] Current [A]
[2] Frequency [Hz]
[3] Motor Speed [RPM]
4-204
.
Function:
Select the desired operating variable to be monitored for trending.
Power yielded to the motor. Reference for the relative value is the rated
motor power programmed in par.1-20
1-21 Motor Power [HP]. Actual value can be read in par.16-10
[kW] or par.16-11 Power [hp].
Output current to the motor. Reference for the relative value is the rated
motor current programmed in par.1-24
be read in par.16-14 Motor
Output frequency to the motor. Reference for the relative value is the
maximum output frequency programmed in par.4-14
Limit [Hz]. Actual value can be read in par.16-13 Frequency.
Speed of the motor. Reference for relative value is the maximum motor
speed programmed in par.4-13
Quick Menu Loggings Trending Continued
> :
Motor Power [kW]
Motor Current. Actual value can
Current.
Motor Speed High
Motor Speed High Limit
TR200 Programming Guide
or par.
Power
[RPM].