Trane TR200 Programming Manual page 155

Parameter Description
[29] Logic rule 3
[30] SL Timeout 0
[31] SL Timeout 1
[32] SL Timeout 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-52 SL Controller Action
Array [20]
Option:
[0] * DISABLED
[1] No action
[2] Select set-up 1
4-118
Function:
Select the action corresponding to the SLC event. Actions are executed
when the corresponding event (defined in par.13-51
Event) is evaluated as true. The following actions are available for selec-
tion:
Changes the active set-up (par.0-10
SL Controller
Active Set-up) to '1'.
TR200 Programming Guide