Trane TR200 Programming Manual page 245

Parameter Description
23-80 Power Reference Factor
Range:
100 %* [0 - 100 %]
23-81 Energy Cost
Range:
1.00 N/ [0.00 - 999999.99 N/A]
A*
23-82 Investment
Range:
0 N/A* [0 - 999999999 N/A]
23-83 Energy Savings
Range:
0 kWh* [0 - 0 kWh]
23-84 Cost Savings
Range:
0 N/A* [0 - 2147483647 N/A]
4-208
Function:
Set the percentage of the rated motor size (set in par.1-20
[kW] or par.1-21 Motor Power
average power yielded at the time running with fixed speed (before up-
grade with variable speed control).
Must be set to a value different from zero to start counting.
Function:
Set the current cost for a kWh in local currency. If the energy cost is
changed later on, it will impact the calculation for the entire period!
Function:
Set the value of the investment spent on upgrading the plant with speed
control, in same currency as used in par.23-81
Function:
This parameter allows for a readout of the accumulated difference be-
tween the reference power and the actual output power.
If the motor size is set in HP (par.1-21
kW value will be used for the Energy Savings.
Function:
This parameter allows a readout of the calculation based on the above
equation (in local currency).
[HP]) which is supposed to represent the
Energy Cost.
Motor Power [HP]), the equivalent
TR200 Programming Guide
Motor Power