Trane TR200 Programming Manual page 243

Parameter Description
NOTE
The adjustable frequency drive has no back-up of the clock function and the set date/time will reset to default
(2000-01-01 00:00) after a power-down unless a Real Time Clock module with back-up is installed. Consequently,
logging will be stopped until the date/time is readjusted in par.0-70
to program for a warning in case the clock has not been set properly, e.g., after a power-down.
NOTE
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-64 Timed Period Stop
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
NOTE
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-65 Minimum Bin Value
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
23-66 Reset Continuous Bin Data
Option:
[0] * Do not reset
[1] Do reset
23-67 Reset Timed Bin Data
Option:
[0] * Do not reset
[1] Do reset
4-206
Date and
Function:
Function:
Function:
Do reset
Select [1] to reset all values in par.23-61
After pressing OK, the setting of the parameter value will automatically
Do not reset
change to [0].
Function:
Do reset
Select [1] to reset all counters in par.23-62
After pressing OK, the setting of the parameter value will automatically
Do not reset
change to [0].
Time. In par.0-79 Clock Fault, it is possible
Continuous Bin
Timed Bin
TR200 Programming Guide
Data.
Data.