Trane TR200 Programming Manual page 31

How to Program
Function Set-ups parameters
The Function Set-ups parameters are grouped in the following way:
Q3-10 Adv. Motor Set-
tings
par.1-90 Motor Thermal
Protection
par.1-93 Thermistor
Source
par.1-29 Automatic Mo-
tor Adaptation (AMA)
par.14-01 Switching Fre-
quency
par.4-53 Warning Speed
High
Q3-20 Digital Reference
par.3-02 Minimum Reference
par.3-03 Maximum Reference
par.3-10 Preset Reference
par.5-13 Terminal 29 Digital Input
par.5-14 Terminal 32 Digital Input
Par.5-15 Terminal 33 Digital Input
3-12
Q3-1 General Settings
Q3-11 Analog Output Q3-12 Clock Settings
par.6-50 Terminal 42 Out- par.0-70
put
par.6-51 Terminal 42 Out- par.0-71
put Min Scale
par.6-52 Terminal 42 Out- par.0-72
put Max Scale
par.0-74
time
par.0-76
time Start
par.0-77
time End
Q3-2 Open-loop Settings
Q3-13 Display Settings
Date and Time par.0-20
Small
Date Format Par.0-21
Small
Time Format Par.0-22
Small
DST/Summer- Par.0-23
Large
DST/Summer- Par.0-24
Large
DST/Summer- par.0-37
par.0-38
par.0-39
Q3-21 Analog Reference
par.3-02 Minimum Reference
par.3-03 Maximum Reference
par.6-10 Terminal 53 Low Voltage
par.6-11 Terminal 53 High Voltage
par.6-12 Terminal 53 Low Current
par.6-13 Terminal 53 High Current
par.6-14 Terminal 53 Low Ref./Feedb. Value
par.6-15 Terminal 53 High Ref./Feedb. Value
Display Line 1.1
Display Line 1.2
Display Line 1.3
Display Line 2
Display Line 3
Display Text 1
Display Text 2
Display Text 3
TR200 Programming Guide