[Pr. Pb16_Notch Shape Selection 2 (Nhq2)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G Series User Manual

[Pr. PB16_Notch shape selection 2 (NHQ2)]

Initial value
00000000h
Set forms of the machine resonance suppression filter 2.
When [Pr. PA08 Gain adjustment mode selection] is set to "5" (Quick tuning mode), the setting value of this servo parameter
reflects the adjustment result of quick tuning.
[Pr. PB16.0_Machine resonance suppression filter 2 selection]
Initial value
0h
0: Disabled
1: Enabled
[Pr. PB16.1_Notch depth selection]
Initial value
0h
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB16.2_Notch width selection]
Initial value
0h
0: α = 2
1: α = 3
2: α = 4
3: α = 5
1 DETAILED LISTS OF SERVO PARAMETERS
30
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
Setting range
00000000h to 00000331h
Setting range
0h to 1h
Setting range
0h to 3h
Setting range
0h to 3h
Setting method
Each axis
Supported software version
A0
Supported software version
A0
Supported software version
A0
Supported software version
Refer to each detail No.