[Pr. Pf94_Drive Recorder - Digital Channel Setting 4 (Drdc4)]; [Pr. Pf95_Drive Recorder - Clear History (*Drclr)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G Series User Manual

[Pr. PF94_Drive recorder - Digital channel setting 4 (DRDC4)]

Initial value
801D8015h
[Pr. PF94.0-3_Drive recorder - Digital channel 7 selection]
Initial value
8015h
Refer to the following for values that can be assigned.
Page 96 [Pr. PF91.0-3_Drive recorder - Digital channel 1 selection]
[Pr. PF94.4-7_Drive recorder - Digital channel 8 selection]
Initial value
801Dh
Refer to the following for values that can be assigned.
Page 96 [Pr. PF91.0-3_Drive recorder - Digital channel 1 selection]

[Pr. PF95_Drive recorder - Clear history (*DRCLR)]

Initial value
00000000h
[Pr. PF95.0_Drive recorder - Clear history selection]
Initial value
0h
0: Disabled
1: Enabled
When "0" (Enabled) is set, the drive recorder history will be cleared at the next power-on or software reset. After the drive
recorder history is cleared, this servo parameter will be "0" (Disabled) automatically.
1 DETAILED LISTS OF SERVO PARAMETERS
98
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
Setting range
00000000h to 8FFF8FFFh
Setting range
0000h to 8FFFh
Setting range
0000h to 8FFFh
Setting range
00000000h to 00000001h
Setting range
0h to 1h
Setting method
Each axis
Supported software version
A0
Supported software version
A0
Setting method
Each axis
Supported software version
A0
Supported software version
Refer to each detail No.
Supported software version
Refer to each detail No.