Selection Example Of Wires - Mitsubishi Electric MELSERVO-J3W Series Instruction Manual

11. OPTIONS AND AUXILIARY EQUIPMENT
The next display shows the case when the A-axis (station 0) is set as the axis to communicate.

11.5 Selection example of wires

CN3-7
CN3-8
CN3-9
CN3-10
POINT
Refer to section 11.1.5 for SSCNET cable.
Wires indicated in this section are separated wires.
To comply with the UL/CSA Standard, use the wires shown in appendix 4 for
wiring.
To comply with other standards, use a wire that is complied with each standard.
Selection condition of wire size is as follows.
Construction condition: One wire is constructed in the air
Wire length: 30m or less
11 - 36
CN3-12
CN3-11
CN3-3/16
CN3-4/17
CN3-2
CN3-15