[Pr. Pb14_Notch Shape Selection 1 (Nhq1)]; [Pr. Pb15_Machine Resonance Suppression Filter 2 (Nh2)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G Series User Manual

[Pr. PB14_Notch shape selection 1 (NHQ1)]

Initial value
00000000h
[Pr. PB14.1_Notch depth selection 1]
Initial value
0h
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB14.2_Notch width selection 1]
Initial value
0h
0: α = 2
1: α = 3
2: α = 4
3: α = 5

[Pr. PB15_Machine resonance suppression filter 2 (NH2)]

Initial value
4500 [Hz]
Set the notch frequency of the machine resonance suppression filter 2.
When [Pr. PA08 Gain adjustment mode selection] is set to "5" (Quick tuning mode), the setting value of this servo parameter
reflects the adjustment result of quick tuning.
When [Pr. PB16.0 Machine resonance suppression filter 2 selection] is set to "1" (Enabled), set the notch frequency with this
servo parameter.
Setting range
00000000h to 00000330h
Setting range
0h to 3h
Setting range
0h to 3h
Setting range
10 to 9000
Setting method
Each axis
Supported software version
A0
Supported software version
A0
Setting method
Each axis
1 DETAILED LISTS OF SERVO PARAMETERS
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
Supported software version
Refer to each detail No.
Supported software version
A0
1
29