Show Sockets Client - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show sockets client

To display information about the sockets clients, use the show sockets client command.
Syntax Description
pid id
raw
tcp
udp
detail
Command Default
None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to display the UDP socket client information:
switch# show sockets client udp
Related Commands Command
clear sockets statistics
show sockets connection Displays information about the socket connection.
show sockets statistics
OL-27852-01
show sockets client [pid id] [raw | tcp | udp] [detail]
(Optional) Displays the socket client information for a specific process. The id range
is from 1 to 65535.
(Optional) Displays information about the raw client.
(Optional) Displays information about the TCP client.
(Optional) Displays information about the UDP client.
(Optional) Displays information about the detailed client.
Modification
This command was introduced.
Description
Clears socket statistics.
Displays information about the socket statistics.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show sockets client
523