Ip Router Eigrp - Cisco Nexus 3548 Command Reference Manual

ip router eigrp

ip router eigrp
To specify the Enhanced Interior Gateway Routing Protocol (EIGRP) instance for an interface, use the
ip router eigrp command. To return to the default, use the no form of this command.
Syntax Description
instance-tag
Command Default
None
Command Modes Interface configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Before you use this command, make sure that you enable EIGRP on the switch.
This command requires the LAN Base Services license.
Examples This example shows how to set the EIGRP instance for an interface:
switch# configure terminal
switch(config)# interface ethernet 1/2
switch(config-if)# no switchport
switch(config-if)# ip router eigrp Base
switch(config-if)#
Related Commands Command
copy running-config
startup-config
feature eigrp
show ip eigrp
interfaces
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
208
ip router eigrp instance-tag
no ip router eigrp instance-tag
Modification
This command was introduced.
Description
Saves the configuration changes in the startup configuration file.
Enables EIGRP on the switch.
Displays information about EIGRP interfaces.
Name of the EIGRP instance. The instance-tag can be any
case-sensitive, alphanumeric string up to 20 characters.
Chapter Unicast Routing Commands
OL-27852-01