Show Bgp Extcommunity - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show bgp extcommunity

To display Border Gateway Protocol (BGP) routes that match an extended community, use the show bgp
extcommunity command.
Syntax Description ip
ipv4
unicast
multicast
4byteas-generic
non-transitive
transitive
as4-number
exact-match
vrf vrf-name
Command Default
None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that match an extended community:
switch# show bgp ip unicast extcommunity 4byteas-generic transitive 1.3:30
Related Commands Command
ip extcommunity-list
OL-27852-01
show bgp {{ip | ipv4} {unicast | multicast}} extcommunity 4byteas-generic {non-transitive |
transitive} [as4-number] [exact-match] [vrf vrf-name]
Displays BGP information for the IPv4 address family.
Displays BGP information for the IPv4 address family.
Displays BGP information for the unicast address family.
Displays BGP information for the multicast address family.
Displays the routes that match the generic specifice extended communities.
Displays the routes that match the nontransitive extended communities.
Displays the routes that match the transitive extended communities.
AS number. The as4-number is a 32-bit integer in the form of a plaintext integer
or <higher 16-bit decimal number>.<lower 16-bit decimal number> .
(Optional) Displays an exact match of the extended community.
(Optional) Specifies the virtual routing and forwarding (VRF) context name.
The name can be any case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Creates an extended community list.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show bgp extcommunity
411