Show Bgp Community-List - Cisco Nexus 3548 Command Reference Manual

show bgp community-list

show bgp community-list
To display Border Gateway Protocol (BGP) routes that match a community list, use the show bgp
community-list command.
Syntax Description ip
ipv4
unicast
multicast
commlist-name
exact-match
vrf vrf-name
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples
This example shows how to display the routes that match a community list:
switch(config)# show bgp ip unicast community-list test1
Related Commands Command
ip community-list
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
410
show bgp {{ip | ipv4} {unicast | multicast}} community-list commlist-name [exact-match] [vrf
vrf-name]
Displays BGP information for the IPv4 address family.
Displays BGP information for the IPv4 address family.
Displays BGP information for the unicast address family.
Displays BGP information for the multicast address family.
Name of a community-list. The commlist-name can be any case-sensitive,
alphanumeric string up to 63 characters.
(Optional) Displays an exact match of the communities.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Creates a community list.
Chapter Unicast Routing Show Commands
OL-27852-01