Set Level - Cisco Nexus 3548 Command Reference Manual

set level

set level
To indicate where to import routes, use the set level command. To delete an entry, use the no form of
this command.
Syntax Description
level-1
level-2
level-1-2
Command Default This command is disabled by default.
Command Modes
Route-map configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the route-map global configuration command and the match and set route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map command has a list of match and set commands associated with it. The match commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map command. The set commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the match commands are met. The no route-map command deletes
the route map.
The set route-map configuration commands specify the redistribution set actions to be performed when
all the match criteria of a route map are met. When all match criteria are met, all set actions are
performed.
This command requires the LAN Enterprise Services license.
Examples This example shows how to import the routes into the Level 1 area:
switch# configure terminal
switch(config)# route-map testcase
switch(config-route-map)# set level level-l
switch(config-route-map)
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
340
set level {level-1 | level-2 | level-1-2}
no set level {level-1 | level-2 | level-1-2}
Modification
This command was introduced.
Imports routes into a Level 1 area.
Imports routes into a Level 2 subdomain.
Imports routes into Level 1 and Level 2.
Chapter Unicast Routing Commands
OL-27852-01