Flush-Routes (Eigrp) - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

flush-routes (EIGRP)

To flush all EIGRP routes in the unicast RIB when an EIGRP instance restarts, use the flush-routes
command. To disable this feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Router configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to flush routes when an EIGRP instance restarts:
switch# configure terminal
switch(config)# router eigrp Test1
switch(config-router)# flush-routes
switch(config-router)#
Related Commands Command
show ip eigrp
interfaces
OL-27852-01
flush-routes
no flush-routes
Modification
This command was introduced.
Description
Displays information about EIGRP interfaces.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
flush-routes (EIGRP)
131