Show Ip Rip - Cisco Nexus 3548 Command Reference Manual

show ip rip

show ip rip
To display the configuration and status of the Routing Information Protocol (RIP), use the show ip rip
command in any mode.
Syntax Description instance-tag
vrf vrf-name
Command Default No default behavior or values
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to display the RIP configuration information:
switch(config-if)# show ip rip
Related Commands Command
show ip rip interface
show ip rip neighbor
show ip rip policy statistics
show ip rip route
show ip rip statistics
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
498
show ip rip [instance-tag] [vrf vrf-name]
(Optional) RIP instance. The instance tag can be a maximum of 20
alphanumeric characters.
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings "default" and "all" are
reserved VRF names.
Modification
This command was introduced.
Description
Displays RIP information for an interface.
Displays RIP neighbor information.
Displays RIP policy statistics.
Displays RIP route information.
Displays RIP statistics.
Chapter Unicast Routing Show Commands
OL-27852-01