Clear Ip Bgp Dampening - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

clear ip bgp dampening

To clear Border Gateway Protocol (BGP) route flap dampening information, use the clear ip bgp
dampening command.
Syntax Description ipv4
unicast
multicast
all
neighbor
prefix
vrf vrf-name
all
default
management
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples
This example shows how to clear BGP route flap dampening information:
switch# clear ip bgp dampening
OL-27852-01
clear ip bgp [ipv4 {unicast | multicast} | all] dampening [neighbor | prefix] [vrf vrf-name | all |
default | management]
Modification
This command was introduced.
(Optional) Clears BGP information for the IPv4 address family.
(Optional) Clears BGP information for the unicast address family.
(Optional) Clears BGP information for the multicast address family.
(Optional) Clears the BGP information for all address families.
(Optional) Neighbor from the selected address family. The format is
A.B.C.D for IPv4.
(Optional) Prefix from the selected address family. The format is
A.B.C.D/length for IPv4.
(Optional) Specifies a particular virtual routing and forwarding
(VRF) instance. The VRF name can be any case-sensitive,
alphanumeric string up to 32 characters.
(Optional) Clears the BGP information from all VRF entries.
(Optional) Clears the BGP information from the default VRF.
(Optional) Clears the BGP information from the management VRF.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
clear ip bgp dampening
73