Show Ip Bgp Filter-List - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show ip bgp filter-list

To display Border Gateway Protocol (BGP) routes that match a filter list, use the show ip bgp filter-list
command.
Syntax Description list-name
exact-match
vrf vrf-name
Command Default
None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match a filter list:
switch(config)# show ip bgp filter-list test1
Related Commands Command
filter-list (BGP)
OL-27852-01
show ip bgp filter-list list-name [exact-match] [vrf vrf-name]
Name of a filter list. The name can be any case-sensitive, alphanumeric string up to
63 characters.
(Optional) Displays an exact match of the filter.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Configures a BGP filter.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip bgp filter-list
443