Show Bgp Community - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show bgp community

To display Border Gateway Protocol (BGP) routes that match a community, use the show bgp
community command.
Syntax Description ip
ipv4
unicast
multicast
as-number
no-advertise
no-export
no-export-subconfed (Optional) Displays the no-export-subconfed community.
exact-match
vrf vrf-name
Command Default
None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that match a community:
switch# show bgp ip multicast community no-advertise
Related Commands Command
ip community-list
OL-27852-01
show bgp {{ip | ipv4} {unicast | multicast}} community [as-number] no-advertise] [no-export]
[no-export-subconfed] [exact-match]} [vrf vrf-name]
Displays BGP information for the IPv4 address family.
Displays BGP information for the IPv4 address family.
Displays BGP information for the unicast address family.
Displays BGP information for the multicast address family.
(Optional) AS number. The AS number can be a 16-bit integer or a 32-bit
integer in the form of <higher 16-bit decimal number>.<lower 16-bit decimal
number>.
(Optional) Displays the no-advertise community.
(Optional) Displays the no-export community.
(Optional) Displays an exact match of the community.
(Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Creates a community list.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show bgp community
409