Cisco Nexus 3548 Command Reference Manual page 23

Chapter Unicast Routing Commands
In the following example, the send and receive capability of the neighbor overrides the receive-only
capability of the address family:
switch (config)# router bgp 65000
switch (config-router)# address-family ipv6 unicast
switch (config-router-af)# additional-paths receive
switch (config-router-af)# additional-paths selection route-map add_path4
switch (config-router-af)# neighbor 2001:db8::1037
switch (config-router-neighbor)# address-family ipv6 unicast
switch (config-router-neighbor-af)# capability additional-paths send
switch (config-router-neighbor-af)# capability additional-paths receive
Related Commands Command
additional-paths send
capability additional-paths
receive
show ip bgp
show ip bgp neighbors
OL-27852-01
Description
Enables BGP additional paths for a prefix to be sent to a capable
peer.
Configures the receive additional paths capability for the specified
neighbor.
Displays information about BGP networks, including path
selections and path IDs.
Displays information about the TCP and BGP connections to
neighbors.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
additional-paths receive
3