Show Ip Bgp Community - Cisco Nexus 3548 Command Reference Manual

show ip bgp community

show ip bgp community
To display Border Gateway Protocol (BGP) routes that match a community list, use the show ip bgp
community command.
Syntax Description community-number
internet
no-advertise
no-export
no-export-subconfed
vrf vrf-name
all
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples
This example shows how to display the routes that are part of the 201 BGP community:
switch# show ip bgp community 201
This example shows how to display the routes that are part of the no-advertise BGP community and all
VRF:
switch# show ip bgp community no-advertise
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
436
show ip bgp community {community-number] [{internet | no-advertise | no-export |
no-export-subconfed}} [vrf {vrf-name | all}]
Community number. Valid value is a community number in the range from
1 to 4294967200, or AA:NN (autonomous system-community
number/2-byte number).
Displays routes that are part of the well-known community internet
community.
Displays routes that are not advertise to any peer (internal or external).
Displays routes with this community that are advertised to only peers in the
same autonomous system or to only other subautonomous systems within a
confederation.
Displays routes that are part of the well-known community
no-export-subconfed.
(Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
(Optional) Specifies the reserved all VRF.
Modification
This command was introduced.
Chapter Unicast Routing Show Commands
OL-27852-01