Clear Ip Route - Cisco Nexus 3548 Command Reference Manual

clear ip route

clear ip route
To clear individual routes from the unicast Routing Information Base (RIB), use the clear ip route
command.
Syntax Description *
addr
addr
vrf vrf-name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the clear ip route command to clear individual routes from the route table.
The * keyword is severely disruptive to routing.
Caution
This command does not require a license.
Examples This example shows how to clear the individual route:
switch(config)# clear ip route 192.0.2.1
Related Commands Command
show ip route
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
92
clear ip route [* | addr | prefix]] [vrf vrf-name]
(Optional) Clears all routes.
(Optional) Clears this route. The format is x.x.x.x.
(Optional) Clears this prefix. The format is x.x.x.x/length.
(Optional) Specifies the virtual routing and forwarding (VRF) context name. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Displays entries in the route table.
Chapter Unicast Routing Commands
OL-27852-01