Match Tag - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

match tag

To redistribute routes in the routing table that match the specified tags, use the match tag command. To
remove the tag entry, use the no form of this command.
Syntax Description
tag-value
Command Default
No match tag values are defined.
Command Modes Route-map configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines An ellipsis (...) in the command syntax indicates that your command input can include multiple values
for the tag-value argument.
Use the route-map global configuration command and the match and set route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map command has a list of match and set commands associated with it. The match commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map command. The set commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the match commands are met. The no route-map command deletes
the route map.
The match route-map configuration command has multiple formats. The match commands can be given
in any order and all match commands must pass to cause the route to be redistributed according to the
set actions given with the set commands. The no forms of the match commands remove the specified
match criteria.
A route map can have several parts. Any route that does not match at least one match clause that relates
to a route-map command is ignored; that is, the route is not advertised for outbound route maps and is
not accepted for inbound route maps. If you want to modify some particular data, you must configure a
second route map section with an explicit match specified.
This command requires the LAN Enterprise Services license.
Examples This example shows how to redistribute routes stored in the routing table with tag 5:
switch# configure terminal
switch(config)# route-map blueberry
OL-27852-01
match tag tag-value [...tag-value]
no match tag tag-value [...tag-value]
Modification
This command was introduced.
List of one or more route tag values. Each can be an integer from
0 to 4,294,967,295. You can configure up to 32 tags.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
match tag
247