Show Ip Eigrp Traffic - Cisco Nexus 3548 Command Reference Manual

show ip eigrp traffic

show ip eigrp traffic
To display the number of Enhanced Interior Gateway Routing Protocol (EIGRP) packets sent and
received, use the show ip eigrp traffic command.
Syntax Description instance-tag
vrf vrf-name
all
default
management
Command Default This command displays information for the default VRF if no VRF is specified.
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the show ip eigrp traffic command to find the number of packets sent and received by this EIGRP
instance.
In addition, this command is useful in determining whether packets from one node are not reaching the
neighboring node due to connectivity or configuration problems.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display the EIGRP traffic statistics:
switch# show ip eigrp traffic
Related Commands Command
show running-config
eigrp
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
470
show ip eigrp [instance-tag] traffic [vrf {vrf-name | all | default | management}]
Modification
This command was introduced.
Description
Displays EIGRP running configuration information.
(Optional) Name of the EIGRP instance. The instance tag can be any
case-sensitive, alphanumeric string up to 20 characters.
(Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The vrf-name argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters.
(Optional) Specifies all VRF instances.
(Optional) Specifies the default VRF.
(Optional) Specifies the management VRF.
Chapter Unicast Routing Show Commands
OL-27852-01